Introduction Introduction This manual contains a complete listing of parts and assemblies for MA-Series mortise locks manufactured by Falcon Lock Company. This edition lists components of MA-Series locks manufactured after February, 2011. All lock case covers are labeled with dates to identify year of manufacture. Example: 2311 = the 23rd week of 2011. Exploded views of each lock function and trim assembly are provided with accompanying charts to identify parts for replacement purposes.
Lever Function ANSI A156.13, 2005 Page Falcon ANSI Description Function MA101 Passage/Closet Latchset Latch bolt by knob/levers at all times. MA161 Connecting Room/Exit Latch Latch bolt operated by knob/lever from inside. No trim outside. Auxiliary dead latch. MA301 Privacy Lock Latch bolt by knobs/levers either side, dead bolt by turn inside or emergency release outside.
Page 6
Introduction MA411 Asylum Lock Latch bolt operated by key from either side. Both knobs/levers always inoperative. Auxiliary dead latch. MA431 Classroom Security Lock with Latch bolt operated by knob/lever from either side except when outside knob/lever Deadbolt is locked from inside or outside by key. Dead bolt retracted by key from inside or outside.
Page 7
Introduction MA621 F08/F10 Front Door/Apartment Latch bolt is operated by knob/lever from either side except when outside knob/ Corridor lever is made inoperative by buttons in face. Dead bolt is operated by turn inside. Key outside operates both bolts. MA641 Dormitory Lock Latch bolt by knob/lever inside and key outside.
Parts and Accessories Parts and Accessories Knob and Lever Designs Levers Gala Napa AG (Avalon-Gala) DG (Dane-Gala) AN (Avalon-Napa) DN (Dane-Napa) QG (Quantum-Gala) SG (Sutro-Gala) QN (Quantum-Napa) SN (Sutro-Napa) Knobs HG (Hana-Gala) HN (Hana-Napa) Screw Packs Part No. Description Part No. Description S76300 #8-32 x Z⁄v”...
Page 38
Parts and Accessories Part No. Description Part No. Description S76302 #8-32 x Z⁄v” L Machine Screw 1³⁄,”-1M⁄,” door E77302 #8-32 x Z⁄v” L Machine Screw 1³⁄,”-1M⁄,” door thickness, thickness, #12-12/ #12-24 x 1Z⁄x” L Wood/machine #12-12/#12-24 x 1Z⁄x” L Wood/machine sectional trim escutcheon Combination Screw...
Parts and Accessories Cams Cams for Falcon cylinders The Falcon MA Series requires a different cam for keyed functions than its predecessor, the Falcon M Series. For all keyed functions except the MA381 function, the MA Series uses a single cam for all standard mortise cylinders and a single cam for all interchangeable core mortise cylinders.
Parts and Accessories Mortise, rim and cam lock for standard cylinders Keyed Mortise Cylinders Mortise Cylinder 900 Series Cylinders are furnished with #4 straight cam and 250 Catalog no. Length Pins Application Series with #1 cloverleaf cam 1Z⁄,” 5 or 6 Generic unless otherwise specified.
Ordering Procedures Ordering Procedures For correct ordering, and to ensure no delays in shipment of your order, the following descriptive data must be listed in the sequence shown. Necessary information can be found in other parts of this manual. The example below shows an order for 16 each MA locksets in the 521 Entry function, DG (Dane-Gala) trim design in a 626 (satin chrome) finish, 8 RH (right hand) and 8 LH (left hand) to accommodate doors 1³⁄v”...
Page 44
About Allegion Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 7,800 people and sells products in more than 120 countries across the world.
Need help?
Do you have a question about the MA101 and is the answer not in the manual?
Questions and answers