Advertisement
6.) The solenoid valve is to be installed a maximum of 2 ft
from indoor coil.
Avoid valve damage while brazing by wrapping valve with a
heat-sinking material such as a wet cloth.
3. Braze valve onto end of liquid tube using silver bearing or
non-silver bearing brazing material. Consult local code re-
quirements.
4. Braze flare adapter onto outlet end of solenoid valve.
5. Wire solenoid coil into system control circuit.
ELECTRICAL JUNCTION
VALVE
NOTE: System flow direction
Fig. 6—Solenoid Valve Installation
3
ELECTRICAL COIL
FLOW ARROW
3
STRAIGHT
/
IN. STUD
8
must match arrow on
bottom of body.
A87044
Advertisement
