Lab.gruppen D 200:4L Quick Start Manual page 30

13. Quick Start Tutorial
14. The B module is already a CL1way as default and can be used to drive the sub.
15. Tap Store/Recall EXIT to return to the Modules Menu.
16. Ensuring Module A (or any other module that you want to control) is selected (yellow border), tap I/O Config.
17. The right side of the I/O CONFIG screen displays a block diagram for the Modules. Tapping the different blue
blocks will access the configuration screens for Input mixer, Levels, Input EQ, Delay and Output EQ/Crossover
respectively. The magnifying glass at the far right end accesses the output configuration. (NOTE: Tapping the
blue return button (left arrow), or the EQ/Levels EXIT button in the menu bar returns to the I/O Config screen
from the various configuration screens.)
Input Mixer Configuration - Drag sliders and tap ON/OFF buttons to control input mixer settings.
30
D SERIES Lake Quick Start Guide rev 2.0.0
Bridge Bridge
1
2
3
4