Pride Mobility go-go ES2 Owner's Manual page 9

I I . Y O U R T R A V E L S C O O T E R
SECUREMENT POINTS
Always secure the Travel Scooter in a forward-facing position in the vehicle. Attach the four tie-down
straps to the designated securement points. See figure 5. Tighten the straps to sufficiently remove all
slack. Never attach tie-downs to adjustable, moving, or removable parts of the Travel Scooter such as
armrests, shrouds, and wheels. These items should be removed. Position the anchor points for the rear tie-
down straps directly behind the rear securement points on the Travel Scooter. The front tie-down straps
should anchor to floor points that are spaced wider than the Travel Scooter to provide increased lateral
stability.
WARNING! Ensure Travel Scooters are properly secured to the motor vehicle during
transport. Scooters that are not properly secured can become a hazard to the user and
to other vehicle passengers in the event of a crash, sudden stopping, or swerving, as the
Travel Scooter could tip or slide out of place.
Figure 5. Securement Points (Identified with black dots)
ES2
IDENTIFICATION KEY
1. FRONT SECUREMENT POINTS
2. REAR SECUREMENT POINTS
1
2
9