Pride Mobility go-go ES2 Owner's Manual page 17

GETTING OFF OF YOUR TRAVEL SCOOTER
1. Bring your Travel Scooter to a complete stop.
2. Toggle the power switch to the center position.
WARNING! Never attempt to get onto or off of your Travel Scooter without first powering
down your scooter. This will prevent the Travel Scooter from moving if accidental
throttle control lever contact is made.
3. Pivot the armrest upwards on the side of the Travel Scooter to which you intend to be exiting the Travel
Scooter.
4. Carefully and safely get out of the seat and stand to the side of your Travel Scooter.
POWER DOWN TIMER FEATURE
Your Travel Scooter is equipped with an energy saving automatic power down timer feature designed to
preserve your Travel Scooter's battery life. If you mistakenly leave the power switch in either the Hi or
Low speed position for approximately 20 minutes, the Travel Scooter's controller shuts down
automatically.
If the power down timer feature takes effect, perform the following steps to resume normal operation.
1. Toggle the power switch to the center ("0") position.
2. Toggle the power switch to either the right or left position and power up your Travel Scooter.
ES2
I V . O P E R A T I O N
17