Download Print this page

Pride Mobility go-go ES2 Owner's Manual page 14

Advertisement

I I I . B A T T E R I E S A N D C H A R G I N G
How do I change a battery in my Travel Scooter?
MANDATORY! Battery posts, terminals, and related accessories contain lead and
lead compounds. Wear goggles and gloves when handling batteries and wash
hands after handling.
WARNING! Always use two batteries of the exact same type, chemistry, and amp-
hour (Ah) capacity. Refer to the product specifications insert and in the manual
supplied with the battery charger for recommended type and capacities.
WARNING! Do not mix old and new batteries. Always replace both batteries at the
same time.
WARNING! Contact your authorized Provider if you have any questions regarding
the batteries in your Travel Scooter.
WARNING! Do not replace the batteries while the Travel Scooter is occupied.
WARNING! The batteries on your Travel Scooter should only be serviced or
replaced by an authorized Provider or a qualified technician.
PROHIBITED! Keep tools and other metal objects away from battery terminals.
Contact with tools can cause electrical shock.
You may need the following to change your batteries:
Metric/standard socket set and ratchet
Adjustable wrench
WARNING! Do not lift beyond your physical capability. Ask for assistance when
necessary while disassembling or assembling your scooter.
WARNING! Do not pull on electrical harness wires directly to detach them from the
Travel Scooter. Always grasp the connector itself when disconnecting the harness to
prevent wire damage.
To change batteries in your Travel Scooter:
1. Remove the seat. See VI. "Disassembly and Assembly."
2. Remove the seat stabilizing knob. See figure 15.
3. Remove the scooter body shroud. See figures 8 and 9.
Press locking tabs to release the rear section of the scooter shroud and lift the shroud up.
Gently twist the front of the scooter shroud and lift completely off the scooter.
4. Disconnect the battery harnesses and tie-down strap then remove the batteries from the Travel Scooter.
See figure 10.
1
Figure 8. Scooter Body Shroud
14
2
3
3
IDENTIFICATION
KEY
1. Locking Tabs
2. Front Fender
3. Locking Posts
ES2

Hide quick links:

Advertisement

loading