Advertisement
I I . Y O U R T R A V E L S C O O T E R
TILLER CONSOLE
The tiller console houses all controls needed to drive your Travel Scooter including the horn, the power
switch, the battery condition meter and the throttle control lever. See figure 1.
PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller
console does become exposed to moisture, do not attempt to operate your Travel
Scooter until the tiller console has dried thoroughly.
Figure 1. Tiller Console
Horn Button
This button activates a warning horn. Your Travel Scooter must be turned on for the horn to be operational.
Do not hesitate to use the warning horn when doing so may prevent accident or injury.
Power Switch
Toggle the power switch to the right to power up (turn on) your Travel Scooter in the highest speed
position.
Toggle the power switch to the cener position to power down (turn off) your Travel Scooter.
Toggle the power switch to the left to power up (turn on) your Travel Scooter in the lowest speed
position.
WARNING! If the power switch is moved to the center "off" position while your Travel
Scooter is in motion, the electronic brakes will engage and your Travel Scooter will come
to an abrupt stop!
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your Travel Scooter up to the
maximum speed you preset with the speed adjustment dial.
Place your right hand on the right handgrip and your left hand on the left handgrip.
Use your right fingers to pull the right side of the lever to disengage your Travel Scooter's brakes and
move forward.
Release the lever and allow your Travel Scooter to come to a complete stop before pulling the other
side of the lever to move in reverse.
When the throttle is completely released, it automatically returns to the center "stop" position and
engages your Travel Scooter's brakes.
6
4
1
3
2
IDENTIFICATION KEY
1. HORN
2. POWER SWITCH
3. THROTTLE CONTROL LEVER
4. BATTERY CONDITION METER
ES2
Hide quick links:
Advertisement
