Paper Jam - Brother HL-2250DN Service Manual

4.1.5 Paper jam

• Paper tray and front cover section
Paper jam at paper tray and front cover section
User Check
• Check if the paper is jammed in the paper tray and front cover section.
If jammed, remove it.
• Adjust the paper guide corresponding to the paper size.
• Check whether the paper of the irregular thickness is loaded.
• Check if too much paper is loaded in the tray.
Step
Paper edge actuator (HL-2250DN/
1 2270DW only) or registration front
actuator catching on some position
Harness connection failure of
2 registration front/rear sensor PCB
ASSY
3 Paper feeding kit worn out
Low voltage power supply PCB
4
ASSY failure
5 Main PCB failure
Registration front/rear sensor PCB
ASSY failure
6
Cause
2-23
Remedy
Correct catching of the paper edge
actuator or registration front actuator.
Check the harness connection of the
registration front/rear sensor PCB ASSY,
and reconnect it.
Replace the paper feeding kit.
Replace the low voltage power supply PCB
ASSY.
Replace the main PCB ASSY.
Check the registration front sensor and
registration rear sensor performance
following the procedure in
Check of Sensors" (Chapter 5).
If any problem occurs, replace the regist
frame ASSY.
"Operational
Confidential