Brother HL-2250DN Service Manual page 93

<Without Duplex Tray model>
(1) Open the Back cover.
(2) Push the both side Ribs of the Back cover to the direction of the arrow 2, and release the
Boss of the Outer chute ASSY.
(3) Release the Boss of the Main body while pulling the Back cover to the direction of the
arrow 3a, and remove the Back cover.
(4) Remove the Back cover actuator from the Back cover.
Outer chute ASSY
Rib
Boss (outer chute ASSY)
Assembling Note:
• When assembling the Back cover, close the Back cover with aligning the Boss of the
Outer chute ASSY with the groove of both side Ribs of the Back cover.
Main body
2
1
2
3b
Rib
Back cover
Back cover
Fig. 3-17
3-23
Boss (main body)
3a
Rib
Rear cover
Backcover
actuator
Hook
Confidential