Brother HL-2250DN Service Manual page 42

Laser printer
Hide thumbs Also See for HL-2250DN:
Table of Contents

Advertisement

■ How to start Maintenance tool
(1) Open the front cover, and turn the power supply of the printer on while pressing down
the [Go] button. Make sure that the Toner/Drum/Error LEDs light up.
(2) Release the [Go] button, and then make sure that all LEDs light off.
(3) Press the [Go] button for over 2 seconds, and the Error LED light up. And then the
printer goes into the PIT3 mode.
(4) Connect the printer to PC with USB cable.
(5) Start the Maintenance tool in the PC.
(6) Select the "Get Information" from Menu of the Maintenance tool.
(7) Select the applicable model name.
(8) Check the port (USB) that the printer is connected through.
(9) Click the [Ok] button.
(10) Appear the "Printer Information" window on the PC screen, and check the error
indication.
2-19
Confidential

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-2270dwHl-2220Hl-2240dHl-2230Hl-2130Hl-2240

Table of Contents