Step 4- Fitting / Removing The Grass Collector - Qualcast MEB1434M Instruction Manual

Assembly
Step 3 - Grass Collector Assembly (continued)
3a. Insert the collector handle
3b. Clip the plastic retainers
Fully insert the rods of the metal frame
grass collector
3c.There is a hole
The grass collector is also designed to collapse into a compact size to reduce storage space when the
lawnmower is not in use.
To do this reverse stage 3b.
Remove the metal frame
Unclip the plastic retainers of the cloth grass collector from the metal frame. Fold grass collector.

Step 4- Fitting / Removing the Grass Collector

4
Fitting the grass collector
Lift the deflector guard
rear of the mower, then, release the deflector guard. Ensure the deflector fits snuggly on the grass
collector
8
Removing and emptying the grass collector
Lift the deflector guard and hold it up, grip the grass collector handle and lift it off to empty it.
16
into the slots on the plastic top of the grass collector
11
17
two sides of the cloth grass collector onto the metal frame
19
in the bottom of the grass collector to hang it up if required.
16
from the slots
8
and hold it up. Fit the grass collector onto the supporting hooks
12
.
Customer Helpline 0345 077 8888
16 18
into the slots on either side of the plastic base of the
18
on either side of the plastic base of the grass collector.
12
7
.
16
20
on the
20