Rack Mounting - Planet FGSD-910P User Manual

Step 2: Place the PoE Ethernet Switch on desktop near an AC power source.
Step 3: Keep enough ventilation space between the PoE Ethernet Switch and the
surrounding objects.
When choosing a location, please keep in mind the environmental
restrictions discussed in Chapter 1, Section 4 under Specification.
Note
Step 4: Connect your PoE Ethernet Switch to 802.3af complied Powered Devices
(PD) and other network devices.
A. Connect one end of a standard network cable to the 10/100RJ-45 ports
or 10/100/1000 port on the Front of the PoE Ethernet Switch.
B. Connect the other end of the cable to the network devices such as
printer servers, workstations, router, etc.
Connection to the PoE Ethernet Switch requires UTP Category 5
network cabling with RJ-45 tips. For more information, please see
the Cabling Specification in Appendix A.
Note
Step 5: Supply power to the PoE Ethernet Switch.
A. Connect one end of the power cable to the PoE Ethernet Switch.
B. Connect the power plug of the power cable to a standard wall outlet.
When the PoE Ethernet Switch receives power, the Power LED should remain solid
Green.

2.4 Rack Mounting

To install the PoE Ethernet Switch in a 19-inch standard rack, follow the instructions
described below.
Step 1: Place your PoE Ethernet Switch on a hard flat surface, with the front panel
positioned towards your front side.
Step 2: Attach a rack-mount bracket to each side of the PoE Ethernet Switch with
supplied screws attached to the package. Figure 2-4 shows how to attach
brackets to one side of the PoE Ethernet Switch.
12