Midea MSMBB-12CRDN1-MP0W Service Manual page 63

3 Electrical
parts
4 Compressor
How to remove the electrical
parts.
1) Perform work of item
1,2.
2) Remove the wires
connected with the
compressor. (On the IPM )
3) Remove the wires
connected with 4-way valve.
4) Remove the red wire
connected with the capacitor
Remove the blue wire
connected with the reactor.
5) Remove the temp. sensor
connectors. Remove the
ground wire
of the compressor
6) Remove the two fixing
screws
7) Remove the electronic
control box.
How to remove the
⑤
61
②
③
Two blue
wires
④
⑥
⑦