Lotus 2004 Eleven Service Notes page 81

Lotus Service Notes
Continue to remove the backing strip and stick the weatherstrip along the seal path down the 'B' post and
along the bottom of the door aperture. Cut the seal to mate with the end of the front weatherstrip. Repeat for
the opposite side, and then remove the top section backing strip and secure the seal along the roof shroud
flange. Use a roller wheel along the whole length of the seal to ensure full adhesion.
A secondary 'J' section seal is applied to the front vertical face of the door shell, linking to the cheater
seal.
BR.14 - DOOR LATCH MECHANISM - Without CDL
Interior release
handle
Interior release
control rod
Door latch mechanism
Relay lever
assembly
Bracket, door beam rear
end to door shell
(Parts List 10.17)
Section BR
Exterior release
button
Exterior
lock
control
rod
b251a
Page 23