Lotus Service Notes
Misfire
P1301
Misfire level causing emissions increase
P1302
Misfire level causing catalyst system damage
Description
When the engine misfire reaches a high enough percentage the engine emission output levels can exceed the
allowed limits, this will produce the fault code P1301. If the misfire percentage is high enough and there is a
possibility that the catalyst may be damaged then code P1302 will be set.
See misfire faults P0300, P0301, P0302, P0303, P0304
Notes:
• The MIL will flash for a 1302 fault code
• The MIL will be illuminated if the 1301 fault is present for 2 consecutive trips.
Page 40
P1301
P1302
Section EMP