Eiki LC-WXL200 Service Manual page 2

Note on R-Polarized glass-in replacement
The R-Polarized glass-in indicated on the figure below has been changed for the substitute parts due to the parts procure-
ment reason. The substitute parts has compatibility in performance but only the thickness of polarized glass differs.
- Thickness of R-Polarized glass: 0.5mm type to 2.0mm type
Due to the thickness of polarized glass has been changed, the polarized glass holder should also be replaced with another
one to match to the substitute parts at the same time when replacing the polarized glass.
When replacing the polarized glass or glass holder, check the stamped parts no. on the lever of the polarized glass holder
and which type of glass holder is used to use the right parts of polarized glass and glass holder.
In case of the parts ordering for R-Polarized glass (64451016034), we will supply the R-Polarized unit (6103628240) which
consists of polarized glass and glass holder as the substitute.
● " "
HLM614A-" or HLM614--" is stamped on the glass holder
Parts name
POLARIZED GLASS (IN/R)
Thickness : 0.5mm
HOLDER_POL_IN_R
● "
HLM0635A-/HLM635AA " is stamped on the glass holder
Parts name
POLARIZED GLASS (IN/R)
Thickness : 2.0mm
HOLDER_POL_IN_R
Stamped parts no.
"HLM0614A-" / "HLM0614--"
or
"HLM0635AA" / "HLM0635A-"
Parts No. Supply
6451016034 No
6103619309
Yes
6103468396
Parts No. Supply
TKGP5552 Yes
AA2HLM0635AA Yes
Changed parts
Polarized glass-in (B)
(Blue)
Substitute
R-Polarized glass-in Unit
(6103628240)
ー
-2-
Specification
R-Polarized glass-in (TKGP5552)
R-Polarized glass holder
(Red)
Polarized glass-in (R)
Polarized glass-in (G)
(Green)