Fisher & Paykel RS36A80J Installation Instructions Manual page 27

IMPORTANT!
The water filter head must be firmly pushed into the product and secured, incorrect installation can lead to water leaks.
1
Remove the red protective cap on the spigot head and align the filter cartridge tool over the
filter handle
2
Pull the freezer drawer out slightly and insert the filter cartridge and tool into the bottom
left of the product. Firmly push the cartridge in until the filter head cannot be pushed
any further.
Filter cartridge in the locked position.
3
Turn 90° clockwise to tighten. Remove filter cartridge tool and close freezer drawer.
!4 INSTALL WATER FILTER CARTRIDGE AND KICKSTRIPS
Front view
US 80 PLUMBING INSTALLATION
SCALE 1.000
A
4
Installing kickstrip filter
Remove filter from inside the product. Fit the filter onto the rails and push to the rear until it
clips securely (refer to A).
SCALE 1.000
SCALE 1.000
B
5
Top kickstrip grille
Align the top grille clips to the top plinth slots then firmly push grille onto appliance until it
clips securely (refer to B).
25