Fisher & Paykel RS36A80J Installation Instructions Manual page 17

The drawings below apply to non-Water dispensing models only (RS36A80J). Dimensions are shown in Imperial (inches) and apply for the preparation and installation of custom door panels.
For Dwg and Dxf files of the below panel preparation download the folder on http://thekitchentools.fisherpaykel.com
15 7/16
2 5/32
Ensure handle is mounted
2 9/ 1 6" from inner edge of panel
to the center – this will avoid
interference with brackets.
All measurements to be made
from inner bottom corner.
1 3/8
For the second panel mirror
and repeat dimensions using
inner bottom corner as the
reference point.
16 5/16
TOP PANEL – REAR VIEW
7 CUSTOM DOOR PANEL DIMENSIONS
Ø 3/32 REF
12x Pilot holes recommended for bracket attachment.
(Do not penetrate front surface).
40
38 ⅝
26 29/ 3 2
24 15/16
6 15/16
4 31/32 3 7/ 1 6 1 5/ 3 2
19 3/8
21 11/32
Ensure handle screw heads are counter sunk into back
of panel to avoid interfering with hanging bracket.
BOTTOM PANEL – REAR VIEW
15 5/ 3 2
Ø 3/ 3 2 REF
10x Pilot holes recommended for
bracket attachment.
5 1/32
(Do not penetrate front surface).
All measurements to be made
from top and centerline.
16 3/8
15