Fisher & Paykel RS36A80J Installation Instructions Manual page 22

IMPORTANT!
Take care when working with the appliance outside of the finished enclosure,
● ●
as the appliance is not secured and has the possibility of tipping forward.
Installation aiders can only be used when door panels and surrounding
● ●
cabinetry panels are the same thickness.
1
Ensure all external packaging material is removed from the appliance before installation.
2
At the base LH side of the appliance attach the LH side bracket to the dedicated threaded
holes and secure with screws x2 (M5 x 8 countersunk Phillips screws). Repeat this process
on the RH side of the appliance.
Repeat this process on the RH side of the appliance.
LH orientation
20
!0 ATTACH SIDE BASE BRACKETS AND INSTALLATION AIDERS
3
The installation aiders supplied are used to determine how
far the appliance needs to be positioned into the finished
enclosure, to be flush with surrounding cabinetry.
Each aider has a set of dimension tabs designed for the
different door panel thickness (refer to A). Select the tabs
which are most suitable to your door panel thickness and
break off all other unwanted tabs.
Repeat this process for the remaining aiders.
4
Carefully open one refrigerator door, ensuring
the appliance does not tip forward. Place the aider
onto the side of the appliance, use the locating boss
to determine the aider's position and secure with
screws x2 (M5 x 8 countersunk Phillips screws).
Repeat this process for the remaining aiders.
Boss
A
Break off unwanted tabs