One-Touch Park - HIKVISION DS-7200 Series User Manual

User Manual of DS-7200/7300/8100 Series DVR
3. Use the directional and zoom / focus / iris buttons on the PTZ control panel to steer the camera to the
desired view, and click the button Left Limit / Right Limit to set the left / right limit point.
Calling Linear Scan
Purpose:
The PTZ camera will horizontally auto scan between the two predefined limit points.
Steps:
1. Click the button
or press the PTZ button on the front panel;
or click the PTZ Control icon
or click PTZ Control on the right-click menu to open the PTZ control panel in live view mode.
2. Select the PTZ camera from the drop-down list for control.
3. Click the icon on the panel and then click the One-touch tab to enter the One-touch control
interface.
4. Click the Linear Scan button to start the linear scan.
5. To stop the linear scan, you can click the Linear Scan button again on the panel.
6. You can click the Restore button and then reboot the PTZ camera to clear the limit points information.

4.2.3 One-touch Park

Purpose:
The one-touch park function allows the PTZ camera to start a predefined action (park action: scan, preset,
pattern, etc.) automatically after a period of inactivity (park time).
Steps:
1. Click the button
or press the PTZ button on the front panel;
or click the PTZ Control icon
or click PTZ Control on the right-click menu to open the PTZ control panel in live view mode.
2. Select the PTZ camera from the drop-down list for control.
3. Click the icon on the panel and then click the One-touch tab to enter the One-touch control
interface.
in the lower-right corner of the PTZ setting interface;
in the quick setting toolbar during the live view process;
Figure 4. 25 Control Panel-Call Linear Scan
in the lower-right corner of the PTZ setting interface;
in the quick setting toolbar during the live view process;
75