Setting Motion Detection - HIKVISION DS-7200 Series User Manual

User Manual of DS-7200/7300/8100 Series DVR

8.1 Setting Motion Detection

Steps:
1. Enter Motion Detection interface and choose a camera you want to set motion detection.
Menu> Camera> Motion
2. Set motion detection area and sensitivity.
1) Check the checkbox of Enable Motion Detection to enable motion detection, use the mouse to
draw detection area(s) and drag the sensitivity bar to set sensitivity. Please refer to Chapter 5.3
Configuring Motion Detection Record.
By default, the motion detection is enabled and configured in full screen.
2) Click the icon of Settings to set alarm response actions.
3. Click Trigger Channel tab and select one or more channels which will start to record or become
full-screen monitoring when motion alarm is triggered.
Figure 8. 1 Motion Detection Setup Interface
Figure 8. 2 Set Detection Area and Sensitivity
139