Call Waiting; Answering A Call - Kenwood DNR935WBT Instruction Manual

Return to the Top page
Bluetooth Control
Ñ

Answering a call

1
Touch [ ] to answer a call or
[ ] to reject a call.
NOTE
• While monitoring the camera view, this screen
does not appear even if a call comes in. To display
this screen, press the <TEL> button or return the
shift knob of car to the driver position.
Operation during a call
Adjust the receiver volume
Press the <S> or <R> button.
Switch the voice output
Touch [ ] / [
the voice output between phone and speaker.
Sending DTMF tone signal
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
96

Call waiting

You can answer a second call while talking
with the first caller by placing the first call
on hold and switching to the second call. You
can switch back and forth between first and
second caller as well.
To answer the second call
Touch [
answers the second waiting call.
To switch back and forth between the first
and second caller
Touch [
Each time you touch [
switched.
To terminate the first call
Touch [
The caller switches to the second caller.
] to switch
]. The first call is placed on hold and
] again.
], the caller is
].