Dialing A Number; Calling A Number In The Call Log; Registering To The Preset Dial Number List; During A Call - Kenwood KDC-U7049BT Instruction Manual

Cd receiver
Hide thumbs Also See for KDC-U7049BT:
Table of Contents

Advertisement

Registering to the Preset dial number
list
Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dialing a number/ Calling a number in the call log/
Calling a number in the Phone Book
Enter Preset memory mode
Press the [PRESET] button.
Select a number and store it in the memory
Turn the Control knob to select memory
number ("P1" – "P6"), and then press the
Control knob for at least 2 seconds.
Cancelling the Preset memory mode
Press the [
] button.

During a call

Disconnecting a Call
Press the [SRC] button.
Switching to the Private mode
Push the Control knob towards right or left.
Switches between Private talk ("PRIVATE") and
Hands-free talk each time this button is pressed.
Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection. If
this happens, the source cannot be switched back to the
hands-free talk mode by operating this unit. Operate your
cell-phone to return to the hands-free talk mode.
Adjusting the voice volume during a call
Turn the Control knob.

Call waiting

Answering another incoming call with the
current call suspended
KDC-U7049BT KDC-U7049BTL
Press the [
] button.
KDC-U6049 KDC-U6049L
1) Press the Control knob.
2) Turn the Control knob to select "Answer", and
then press the Control knob.
Answering another Incoming call after
terminating the current call
Press the [SRC] button.
Continuing the Current Call
1) Press the Control knob.
2) Turn the Control knob to select "Reject", and
then press the Control knob.
Answering the waiting call after terminating
the current call
KDC-U7049BT KDC-U7049BTL
Press the [
] button.
KDC-U6049 KDC-U6049L
Press the [SRC] button.
Switching between the current call and waiting
call
Press the Control knob.
Each pressing of this knob switches the calling
party.

Clearing the Disconnection message

KDC-U7049BT KDC-U7049BTL
Press the [
] button.
KDC-U6049 KDC-U6049L
Press the [LOG] button for at least 1 second.
"HF Disconnect" disappears.
25
|
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-u7049btlKdc-u6049lKdc-u6049

Table of Contents