Camera Control; Switching The View Camera - Kenwood DNR935WBT Instruction Manual

Return to the Top page

Camera Control

ñ
C
amera Control
When a CMOS-3xx (optional accessory) is
connected, the camera can be controlled
from this unit.
Preparation
• [EJECT Key Longer than 1 Second] must be set to
User interface
"CAM". See
Camera Control
You can adjust the camera angle of the
camera system and display of the guideline.
1
Press the <G> button for 1 second.
Camera view screen appears.
2
Adjust each item as follows.
1
3
Guideline
1
Pressing each time turns on or off the
guideline display alternately.
Angle
2
Pressing each time changes camera angles in
the following order:
Super wide view/ Wide view/ Overhead view/
Wide view + Top view/ Corner view
3
Clearing the Camera View display.
100
(P.103).
2

Switching the View Camera

Switching between the front view camera
and the rear view camera.
1
Press the <G> button for 1 second.
Camera view screen appears.
2
Touch illustrated area during Camera
view screen.
Switches between the front view camera
and rear view camera each time you touch
the illustrated area.