Kenwood DNR935WBT Instruction Manual page 105

Return to the Top page
Setting Up
Language setup
1
Touch [SET] of [Language] in the User
Interface screen.
Language Setting screen appears.
2
Set each item as follows.
GUI Language Select
Select the language used for the GUI and input
methods.
STT
Select the language used for Speech to Text
(STT).
TTS
Select the language used for Text to Speech
(TTS).
3
Touch [Enter].
NOTE
• To cancel the language setup, touch [Cancel].
104
Register operations by Gesture
Control
You can register operations that work by the
motion of your hand.
1
Touch [SET] of [Gesture Setting] in the
User Interface screen.
Gesture Setting screen appears.
2
Set each item as follows.
Gesture Control
Select to be on or off the Gesture Control.
Default is "ON".
Beep
The beep comes out when a gesture is
detected.
Default is "ON".
Gesture Registration*
Resister operations work by gestures.
[Initialize]: return to the initial setting.
Sensitivity*
Adjust the detection range of the Gesture
Control from MIN (short) to MAX (long) in 12
steps.
Default is "6".
* These items can be set only when Gesture
Control is off.