Initial Setup - Kenwood DNR935WBT Instruction Manual

Return to the Top page
Basic Operations

Initial setup

Perform this setup when you use this unit for the first time or when you reset the unit. See
Resetting the Unit (P.129).
1
Set each item as follows.
Language Setup
Select the language used for the GUI and input methods. Default is "English (United States)".
1 Touch [Language Setup].
2 Select a language from the list.
WiFi Setup
Configure settings for connection to Wi-Fi.
1 Touch [WiFi Setup].
2 Slide Wi-Fi to ON.
3 Select the Wi-Fi access point to register from the list.
4 Enter the Password.
5 Touch [Connect].
6 After setting, press the < 6 > button.
For details on operation, see
Date Setup
Set the date and time.
1 Touch [Date Setup].
2 Touch [Select time zone].
3 Select a time zone.
4 After setting, press the < 6 > button.
For details on operation, see
Account Setup
Set the information about the user of this unit.
1 Touch [Account Setup].
For details on operation, see
14
Wi-Fi Setup (P.24).
Clock and Date Setup (P.28).
About Account (P.30).