Bradford White UCG100H199 Installation & Operation Manual page 32

Step 3: Press "SET" button for new setting to take effect immediately. The setpoint will stop flashing. If the "SET" button
is not pressed, the new temperature setting will take effect in approximately 10 seconds.
To Change Temperature Format in Display from F to C or ˚C to ˚F:
Step 1: Press "SELECT" button until "F/C" is displayed.
Step 2: Press "SET" button to change temperature format. Symbol "F/C" will flash.
idle
Operational
Status
SELECT
Step 3
idle
Operational
Status

SELECT
P ress select
Step 1
idle
Operational
Status
SELECT
Step 2
32
setpoint
°F

SET
Press SET for setting to
take effect immediately
°F °F/°C
SET
°F °F/°C

SET
"Setpoint" flashes
for 10 seconds
"°F/°C" Flashes