Bradford White UCG100H199 Installation & Operation Manual page 31

Step 3: Press "SET" button for new setting to take effect immediately. "Setpoint" will stop flashing. If the "SET" button is
not pressed, the new temperature setting will take effect in approximately 10 seconds.
To Decrease Setpoint Temperature
Step 1: Depress and hold "Temperature Down" button until desired setpoint temperature appears in the display.
Step 2: "Setpoint" indicator begins flashing in the display after pressing "Temperature Down" button.
setpoint
°F
idle
Operational
Status

SELECT SET
Press SET Button for setting to
Step 3
to take effect immediately
°F

idle
Operational
Status
SELECT SET
Step 1
setpoint
°F

idle
Status Operational
SELECT SET
Step 2
31
"Setpoint" flashes
for 10 seconds
"Setpoint"
flashes