Configuration Descriptor (Table 6-22); Interface Descriptor; Table 6-22: Bulk Only Transport Configuration Descriptor; Table 6-23: Bulk Only Data Interface Descriptor - Seagate M8U-Internal SpinPoint Product Manual

2.5” hard disk drive
Table of Contents

Advertisement

6.4.2.2

Configuration Descriptor (Table 6-22)

Table 6-22: Bulk Only Transport Configuration Descriptor

6.4.2.3

Interface Descriptor

The device shall support at least one interface, known herein as the Bulk-Only Data Interface. The Bulk-Only
Data Interface uses three endpoints.
Composite mass storage devices may support additional interfaces, to provide other features such as audio or
video capabilities. This specification does not define such interfaces.
The interface may have multiple alternate settings. The host shall examine each of the alternate settings to
look for the bInterfaceProtoco (50h) l and bInterfaceSubClass (06h) it supports optimally. (Table 6-23)
Spinpoint M8U-Internal Product Manual REV 3.4

Table 6-23: Bulk Only Data Interface Descriptor

INSTALLATION
86

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M8U-Internal SpinPoint and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents