INSTALLATION
Table 6-39: Descriptor Code Definition
Table 6-40: Formattable Capacity Descriptor
The Number of Blocks field indicates the maximum (or fixed) number of addressable blocks for the given
capacity descriptor.
The Block Length specifies the length in bytes of each logical block for the given capacity descriptor.
6.5.6 WRITE (10) Command (2Ah)
The WRITE (10) command (Table 6-41) requests that the UFI device write the data transferred by the host to
the medium.
Table 6-41: WRITE (10) Command
DPO: This bit should be set to zero.
FUA: This bit should be set to zero.
RelAdr: This bit should be set to zero.
Spinpoint M8U-Internal Product Manual REV 3.4
100
Need help?
Do you have a question about the M8U-Internal SpinPoint and is the answer not in the manual?