Access Control - TP-Link Archer C9 User Manual

Chapter 9
• TCP-SYN-FLOOD Attack Filtering
Protocol-Synchronize (TCP-SYN) flood attack.
Tips:
The level of protection is based on the traffic packets number. The protection will be triggered immediately
when the number of packets exceeds the preset threshold value (the value can be set on
Tools > System Parameters
DoS Host List.
5. Select
Ignore Ping Packet From WAN Port
from WAN port.
6. Select Forbid Ping Packet From LAN Port
from LAN port.
7. Click Save to make the settings effective.
9. 2.

Access Control

Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
How can I
do that?
- Enable to prevent the Transmission Control
> DoS Protection Level Settings), and the vicious host will be displayed in the
Block or allow specific client devices to access my network (via
wired or wireless).
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to Advanced > Security > Access Control.
if you want to ignore the ping packets
if you want to ignore the ping packets
Network Security
Advanced > System
Blocked
56