Setting Up An Ipv6 Internet Connection - TP-Link Archer C9 User Manual

Chapter 4
Tips:
1. If your Internet connection type is
2. If you use Dynamic IP and
please go to Advanced >
3. If you still cannot connect to the Internet, refer to
4. 3.

Setting Up an IPv6 Internet Connection

Your ISP provides information about one of the following Internet connection types:
PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge).
1. Visit http://tplinkwifi.net, then log in with the password you set for the router.
2. Go to Advanced > IPv6
Bigpond Cable, please go to
PPPoE and you are provided any other parameters that are not required on the page,
Network > Internet to complete the configuration.
FAQ
to log into the configuration page.
Set Up Internet Connections
Advanced > Network
for further instructions.
> Internet.
22