Make Applications Free From Port Restriction By Dmz - TP-Link Archer C9 User Manual

Chapter 10
Follow the steps below to configure the port triggering rules:
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced > NAT Forwarding
3. Click View Existing
internal port and protocol will be automatically filled with contents. The following
picture takes application
4. Click OK to save the settings.
Note:
Your configurations will not take effect if NAT function is disabled. Then you should go to
System Parameters page to enable NAT.
Tips:
1. You can add multiple port triggering rules according to your network need.
2. The triggering ports can not be overlapped.
3. If the application you need is not listed in the Existing Applications list, please enter the parameters manually.
You should verify the external ports the application uses first and enter them into External Port field according
to the format the page displays.
10. 3. Make Applications Free from Port Restriction by
DMZ
When a PC is set to be a DMZ (Demilitarized Zone) host in the local network, it is totally
exposed to the Internet, which can realize the unlimited bidirectional communication
between internal hosts and external hosts. The DMZ host becomes a virtual server with
all ports opened. When you are not clear about which ports to open in some special
> Port Triggering
Applications, and select the desired application. The external port,
MSN Gaming Zone
and click Add.
as an example.
Advanced
NAT Forwarding
> System Tools >
63