Table of Contents
Advertisement
Inside the System page, the following information about the switch is listed:
Network Setting
•
IP address: 192.168.0.1
•
Subnet Mask: 255.255.255.0
•
Broadcast: 255.255.255.255
•
Default gateway: 0.0.0.0
The configuration above is only a reference setting. If you want to reset or change the numbers, you can
click Agent Config to change or reset them.
System Group
•
SysDescription: Lists the switch name and firmware version number
•
SysUpTime: Lists the time elapsed since powering on the switch
•
SysContact: Enter the name of the person to contact if there are problems with the switch
•
SysName: Enter a name for the switch
•
SysLocation: Enter the switch's location; for example, "MIS Department"
Remember to click Apply after entering any new information
Statistics Screen
The Statistics page displays the detailed information on network traffic for each Ethernet port and the fiber
port.
18
.
Advertisement
Table of Contents
