Subscribe to Our Youtube Channel
Related Manuals for Asante FriendlyNet FH100TX5
Summary of Contents for Asante FriendlyNet FH100TX5
- Page 1 FriendlyNet FH100TX5 5-Port Fast Ethernet Hub User’s Manual Asanté Technologies, Inc. 821 Fox Lane San Jose, CA 95131...
-
Page 2: Copyright Notice
Copyright Notice Copyright 1997 by Asanté Technologies, Inc. All rights reserved. No part of this manual, or any associated artwork, software, product design or design concept, may be copied, reproduced or stored, in whole or in part, in any form or by any means mechanical, electronic, optical, photocopying, recording or otherwise, including transla- tion to another language or format, without the express written consent of Asanté... -
Page 3: Table Of Contents
Table of Contents Introduction..............1-1 FriendlyNet FH100TX5 Fast Ethernet Hub ........ 1-1 Network Reliability ..............1-1 Features..................1-2 Package Contents............... 1-2 Installation................ 2-1 Planning 100Base-TX Networks..........2-1 Cabling Requirements..............2-2 Voltage Requirements..............2-2 Connecting Network Devices............ 2-3 100Base-T Station to Hub Connection ........ 2-3 Hub to Hub Connection (Cascading Hubs) ...... -
Page 4: Introduction
Introduction FriendlyNet FH100TX5 Fast Ethernet Hub Thank you for purchasing the Asanté FriendlyNet FH100TX5, a 5-port Fast Ethernet Hub designed to give you the ultimate in flexibility, ease- of-use, and reliability. The FH100TX5 Fast Ethernet Hub is a 100Base-TX multiport repeater for use with networks using Unshielded Twisted Pair (UTP) Category 5 cable or Shielded Twisted Pair (STP) cable. -
Page 5: Features
Introduction Features Plug-and-Play installation Connects up to five 100Base-TX segments per hub; uplink port can be used to connect to another hub or hub stack Performs automatic partitioning of ports Complies with the IEEE 802.3u Fast Ethernet standard Works with Category 5 UTP or STP cable Contains power, collision, link/activity, and partition LEDs to aid network diagnosis and management Compact design;... -
Page 6: Installation
Installation Installation of the FH100TX5 hub consists of the following steps: Plan your 100Base-TX network. Review cabling and voltage requirements. Connect your hub to network devices. Mount the hub to a wall or countertop. Planning 100Base-TX Networks 100Base-TX networks need to be planned out slightly different from 10Base-T network because new hubs and new wiring configurations are necessary. -
Page 7: Cabling Requirements
Installation Figure 2-1 Sample 100Base-TX network layout Cabling Requirements 100Base-TX requires data-grade (Category 5) UTP (Unshielded Twisted Pair) cable. Important: Some installations have Category 5 cabling but do not have wall outlets and/or wiring closet punch-down blocks that meet Category 5 require- ments. -
Page 8: Connecting Network Devices
FriendlyNet Fast Ethernet Hub User’s Manual Connecting Network Devices Before you connect the hub to other devices, review the following guidelines: Make sure the network cable length is less than 100 meters. Use a straight-thr ough twisted pair cable. When connecting two hubs together (cascading hubs), make sure that the link between them is not longer than fi... -
Page 9: Hub To Hub Connection (Cascading Hubs)
Installation Hub to Hub Connection (Cascading Hubs) To connect two hubs together, follow the instructions and diagram below. Important: When using the uplink port on an FH100TX5 hub, that hub’s port #5 cannot be used. The hub’s uplink port and port #5 CANNOT be used simultaneously. -
Page 10: Multiple Hub And Station Configuration
FriendlyNet Fast Ethernet Hub User’s Manual Multiple Hub and Station Configuration To connect two FriendlyNet Hubs and multiple Fast Ethernet network stations, follow the guidelines and diagram below. Important: Your Fast Ethernet network configuration must comply with the IEEE 802.3u standard. The maximum number of 100Base-TX hubs between any two network stations is TWO. -
Page 11: Wall Mounting The Friendlynet Hub
Installation Wall Mounting the FriendlyNet Hub The FriendlyNet Fast Ethernet Hub can be mounted to a wall or to the surface of a countertop using the screws included with the hub. To mount the hub to a wall or countertop: Screw one of the enclosed 1/2-inch screws into a wall (or countertop), leaving approximately 1/4 inch of the screw’s threads exposed. -
Page 12: Led Indicators
LED Indicators LED Indicators The FriendlyNet FH100TX5 Fast Ethernet hub contains LEDs that represent the following: Power Collision Link/Activity Partition Figure 3-1 FriendlyNet FH100TX5 Fast Ethernet Hub LEDs Power LED The gr een PWR (power) LED on the hub’s front panel illuminates when the hub is turned on and receiving power. -
Page 13: Troubleshooting
LED Indicators Collision LED The yellow COL (collision) LED on the hub’s front panel illuminates when two or more stations on the network attempt to transmit pack- ets simultaneously. ∆ Note: Collisions are normal in Fast Ethernet net- works. Excessive collisions may indicate that your net- work is congested. -
Page 14: Troubleshooting
Troubleshooting Monitoring LEDs The following table describes how to troubleshoot problems with your network and/or the hub by monitoring the hub’s LEDs. Problem Action Power LED is off Make sure the power adapter is connected to the power outlet and is properly inserted into the power connector on the hub. - Page 15 Troubleshooting Problem Action Link LED is off Make sure the hub is powered on. Make sure the device on the other end is pow- ered on. Make sure the proper cabling is used between the device and the hub (refer to the cable guidelines specified in Chapter 2).
-
Page 16: Specifications
Specifications FriendlyNet FH100TX5 Fast Ethernet Hub Standards IEEE 803.3u 100Base-TX Fast Ethernet Network Media 100Base-TX unshielded twisted-pair cabling (Category 5 UTP) Maximum Segment Lengths 100 meter hub-to-station connection 5 meter hub-to-hub connection Connectors 5 RJ-45 connectors 1 cross-over Uplink connector... - Page 17 Specifications Environment Temperature Operating: 0° C to +40° C Storage: -20° C to +70° C Humidity Operating: 10% to 80% RH Storage: 5% to 90% RH Input Power Requirements Voltage: AC voltage to 12VDC external power Standards Compliance FCC Class A CE Mark Page B-2...
-
Page 18: Technical Support
Technical Support Contacting Technical Support To contact Asanté Technical Support: Telephone (800) 622-7464 (408) 432-6018 Fax-Back (800) 741-8607 Internet Mail support@asante.com World Wide Web Site http://www.asante.com Bulletin Board Service (BBS) (408) 432-1416 ARA BBS (guest log-in) (408) 894-0765 AppleLink Mail/BBS ASANTE FTP Archive ftp.asante.com... - Page 19 ASANTÉ TECHNOLOGIES, INC., 821 FOX LANE, SAN JOSE, CA 95131 PHONE: 408.435.8388, 800.662.9686 • FAX: 408.432.7511 • e-mail address: sales@asante.com • World Wide Web site: http://www.asante.com ©1997 Asanté Technologies Inc., Asanté is a trademark of Asanté Technologies, Inc. All brand names and products are trademarks or registered trademarks of their respective holders.
Need help?
Do you have a question about the FriendlyNet FH100TX5 and is the answer not in the manual?
Questions and answers