Advertisement
Light Kit (continued)
www.hunterfan.com.br
Attachment Screw
Wire Slot
Install the remaining attachment
Thread the 2-pin connector through the
Connect the upper 9-pin plug connector
screw to secure the light kit to the
wire slot in the the switch housing.
from the fan to the lower 9-pin plug
mounting plate. Securely tighten all
connector in the light kit.
three screws.
Make sure the light kit is securely attached to the mounting
plate. Failure to properly secure all three assembly screws
could result in the light fixture falling.
14
MD506-01 • 09/19/14 • © Hunter Fan Company
Advertisement
