Advertisement
Wiring
Green/Yellow
Stripe
Using an orange wire
connector from
the
hardware bag,
connect the 3 grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling, downrod, and
hanging bracket.
Refer to CAUTION c.1 on pg. 2
Note: To connect
the wires, hold the
bare metal leads
together and place a
wire connector over
them, then twist
clockwise until tight.
Using the orange wire
connectors from the remote
control hardware bag,
connect the blue wire from
the receiver to the black
with white stripe wire from
the fan. Connect the yellow
wire from the receiver to the
brown wire from the fan.
10
MD506-01 • 09/19/14 • © Hunter Fan Company
Using the orange wire
connectors from the
hardware bag, connect the
brown wire (ungrounded)
from the ceiling to the
black wire from the
receiver. Connect the blue
wire from the ceiling to
both the white wire from
the receiver and the blue
wire from the fan.
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
www.hunterfan.com.br
blue
Advertisement
