Advertisement
Blades
www.hunterfan.com.br
Holes
Insert blade into slot. Align the holes on the
Attach the blade to the motor using the flat
blade with the holes in the fan motor.
washers from the
hardware bag and blade
assembly screws found in the
hardware bag.
Repeat for each blade.
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
12
scratching. Cleaning agents may damage the finishes.
MD506-01 • 09/19/14 • © Hunter Fan Company
Advertisement
