Table of Contents
Advertisement
Pairing Your Device Manually
Pairing is the set-up process to introduce your Bluetooth-capable device to the K1. Once your
device is paired, the K1 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make
it "discoverable" by turning on Bluetooth mode (check in Options or Settings).
2. Press the
enter auto-pairing mode and attempt to connect to a Bluetooth device. Otherwise, follow
step 3 to begin pairing.
3. Press and hold the
the Bluetooth Button will flash quickly, indicating the unit is in pairing mode.
4. "iHome Kineta K1" should appear in your device's Bluetooth menu. If "Not Paired", "Not Connected"
or similar message appears, select "iHome Kineta K1" to connect it. If prompted for a passcode, enter
"1234" on your device's keypad.
iHome Kineta K1
For iPhone
5. If pairing is successful, a tone will sound and the Bluetooth Button light will glow solid, indicating the K1
is ready to play music. There should also be an indication on your device. If no device is successfully
paired within 3 minutes the K1 will default to previous mode. Once the K1 is paired to a device, it will
attempt to autolink when the device is within range (about 30 feet).
Power/End Button to turn on the K1. The first time the unit is powered on, it will
Bluetooth Button for 2 seconds. The pairing tone will sound twice and
iHome Kineta K1
iHome Kineta K1
For other
8
K1
Using the
iHome Kineta K1
Hide quick links:
Advertisement
Table of Contents
