Charging Devices Using The K-Cell - iHome Kineta iKN150 Instruction Manual

K1
Using the

Charging Devices Using the K-Cell

Charge K-Cell fully before use. For first time charge, charge for at least 3 hours.
Connect the USB cable plug included with your device to the standard
Charging Port on the top of the K-Cell and connect the other end to the device
you wish to charge. To charge an Android or Windows phone you may use
the USB to micro USB cable supplied with this model. To charge an Apple
IOS iPhone or iPod, with either Lightning or 30-pin connector, use the
charging cable that was supplied with your Apple device.
Bypass Charging Mode: To charge a device when the inserted K-Cell is depleted but power remains in
the K1 internal battery, press and hold the Button for about 5 seconds to bypass the K-Cell and charge
directly from the K1. All LEDs will flash twice to indicate bypass charge mode. The internal battery charge
indicator will remain lit.The K1 will not play in Bypass Charging Mode. To exit this mode, press the
Power Button or connect the K1 to AC power.
5 SECS
6