Playing Audio Via Aux In - iHome Kineta iKN150 Instruction Manual

Playing Audio via Aux In

1. Connect one end of a 3.5mm stereo audio cable (not
included) to the Aux-in jack on the left side of the unit
and connect the other end to the headphone or
line-out jack on your audio device.
2. Press the Button on the unit to turn it on.
3. Power on the audio device and use the controls on the
device to play or pause audio, and navigate tracks.
4. Press the or
You can also adjust volume on your device.
5. When done listening, press the
unit OFF. Remember to turn off your device, too.
NOTE: Make sure no Bluetooth device is playing or you
will not hear the Aux-in audio playing.
Button to adjust the system volume.
Button to turn the
Mobile Phone
11
Using the
DC 9V 2.5A
PC/Tablet Game Devices iPod Laptop
K1
MP3/MP4