Denon AVR-2311 Owner's Manual page 68

ENGLISH
Manual Setup
Option Setup
Make various other settings.
Setting items
Volume Control Volume Display : Set how volume is displayed.
Set the MAIN ZONE (room • Relative : Display ---dB (Min), in the range –80.5 dB – 18 dB.
where the unit is located) • Absolute : Display in the range 0 (Min) – 99.
volume setting.
• The "Volume Display" setting is applied also to the "Volume Limit" and
"Power On Level" display method.
• The "Volume Display" setting applies to all zones.
Volume Limit : Make a setting for maximum volume.
• OFF : Do not set a maximum volume.
• –20dB (61) / –10dB (71) / 0dB (81)
Power On Level : Define the volume setting that is active when the
power is turned on.
• Last : Use the memorized setting from the last session.
• – – – (0) : Always use the muting on condition when power is turned on.
• –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
Mute Level : Set the amount of attenuation when muting is on.
• Full : The sound is muted entirely.
• –40dB : The sound is attenuated by 40 dB down.
• –20dB : The sound is attenuated by 20 dB down.
Source Delete BD / DVD / TV / SAT/CBL / DVR / GAME / V.AUX
Remove from the display / DOCK / USB/iPod / TUNER / CD : Select input
input sources that are not source that is not used.
used. • ON : Use this source.
• Delete : Do not use this source.
NOTE
• Input sources being used in the various zones
cannot be deleted.
• Input sources set to "Delete" cannot be selected
using
64
Remote control operation
buttons
Default settings are underlined.
Setting details
SOURCE SELECT
.
Move the cursor
(Up/Down/Left/Right)
Setting items
GUI Screensaver : Make screensaver settings.
Make the settings related to • ON : The screen saver is activated during menu display, iPod, USB/iPod
displays on the TV screen. or TUNER screen display if no operation is performed for an approximately
3-minute continuous period. When you press
is cancelled and the screen before that screen saver started is displayed.
• OFF : Screensaver is not activated.
Wall Paper : Set wallpaper to display in the background when playback
is stopped, etc.
• Picture : Set the background to a picture (DENON logo).
• Black : Set the background to black.
Format : Set the video signal format to be output for the TV you are using.
• NTSC : Select NTSC output.
• PAL : Select PAL output.
"Format" can also be set by the following
procedure. However, the menu screen is not
displayed.
1. Press and hold the main unit's
least 3 seconds.
"Video Format" appears on the display.
o p
2. Press and set the video signal format.
3. Press the main unit's
to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Text : Display the details of operation when switching surround mode,
input mode, etc.
• ON : Turn display on.
• OFF : Turn display off.
Master Volume : Display the master volume during adjustment.
• Bottom : Display at the bottom.
• Top : Display at the top.
• OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
Confirm the setting
Setting details
uio p
, the screensaver
p and i for at
ENTER MENU RETURN
, or
Return to previous menu