Denon AVR-2311 Owner's Manual page 45

Quick select function
All of the settings in step 1 can be memorized together. By memorizing
frequently used settings, you can quickly access and enjoy a playback
environment that is consistently the same.
n Saving the settings
1
Set the items below to the settings you want to save.
q Input source (vpage 21)
w Volume (vpage 21)
e Surround mode (vpage 29)
r Video Select (vpage 50)
t Audyssey Setting
(MultEQ ® , Dynamic EQ ® , Dynamic
Volume ® ) (vpage 55)
2
Press and hold the desired QUICK SELECT until
"Memory" appears on the display.
The current settings will be memorized.
GQuick Select DefaultsH
Input source
QUICK SELECT 1 BD
QUICK SELECT 2 SAT/CBL
QUICK SELECT 3 DOCK
n Recalling the settings
Press QUICK SELECT at which the
settings you want to call out are saved.
The , or indicator illuminates on
the display.
Naming quick select settings
See "Quick Select Name" (vpage 65).
• The Quick Select function can be set separately for the different
zones (vpage 43 "Quick select function").
QUICK SELECT
• If on the main unit
is pressed, the same function as
with the remote control unit can be
obtained.
NOTE
Input sources stored with the quick select function cannot be selected
if they have been deleted at "Source Delete" (vpage 64). In this case,
store them again.
REC OUT mode
When using the audio/video recording connectors (DVR outputs), you
can record the audio or video from a different program source while
listening to the currently played track.
1
Press ZONE2/REC SELECT
Volume
"ZONE2 Source" is shown on the display.
–40 dB
2
–40 dB
Turn SOURCE SELECT
–40 dB
Source" is displayed.
The indicator illuminates.
ZONE2 Source ZONE2 TUNER
RECOUT USB/iPod RECOUT DOCK
3
Turn SOURCE SELECT
be recorded.
• For operating instructions, refer to the respective equipment's
operating instructions.
• To record FM or AM broadcasts, select the broadcast (vpage 25).
4
Start recording.
• For operating instructions, refer to the respective equipment's
operating instructions.
• To cancel, press
until "ZONE2 Source" is displayed.
• Make a test recording before starting the actual recording.
• The digital signals are not output to the analog REC OUT connectors.
• As the digital audio signal input from the HDMI connector is not
output to the digital recording connector (OPTICAL), you should
connect using the OPTICAL and COAXIAL connectors.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• The operable buttons on the remote control unit in REC OUT mode
while it is in the operating mode for ZONE2 are as follows:
• ZONE/DEVICE power button
• Muting button
• Master volume control button
NOTE
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• Input sources for which "Delete" is selected at "Source Delete"
(vpage 64) cannot be selected.
.
until "RECOUT
···· ZONE2 USB/iPod
···· RECOUT Source
to choose the input source to
ENGLISH
Convenient functions
ZONE2/REC SELECT SOURCE SELECT
, then turn
41