Care And Cleaning; Service And Customer Care - Kenwood FP582 Instructions Manual

to use your mill
1 Put your ingredients into the jar. Fill it no more than half full.
2 Fit the sealing ring into the blade unit.
3 Turn the blade unit upside down. Lower it into the jar, blades
down.
4 Screw the blade unit onto the jar until it is finger tight.
5 Place the mill onto the power unit and turn to lock (see "to use
your liquidiser").
6 Switch on to maximum speed or use the pulse control.
7 After milling, you can replace the blade unit with the sprinkler lid
and shake out your food.
l
The sprinkler lid is not airtight.
hints
l
Herbs are best milled when clean and dry.
care & cleaning
l
Always switch off and unplug before cleaning.
l
Handle the blades and cutting discs with care - they are
extremely sharp.
l
Some foods may discolour the plastic. This is perfectly normal
and won't harm the plastic or affect the flavour of your food. Rub
with a cloth dipped in vegetable oil to remove the discolouration.
power unit
l
Wipe with a damp cloth, then dry. Ensure that the interlock area
is clear of food debris.
l
Store excess cord in the storage area at the back of the
machine.
liquidiser/mill
1 Empty the jug/jar before unscrewing it from the blade unit.
2 Wash the jug/jar by hand.
3 Remove and wash the sealing ring.
4 Don't touch the sharp blades - brush them clean using hot
soapy water, then rinse thoroughly under the tap. Don't
immerse the blade unit in water.
5 Leave to dry upside down.
twin beater geared whisk
l
Detach the beaters from the drive head by gently pulling them
free. Wash in warm soapy water.
l
Wipe the drive head with a damp cloth, then dry. Do not
immerse the drive head in water.
all other parts
l
Wash by hand, then dry.
l
Alternatively they can be washed on the top rack of your
dishwasher. A short low temperature programme is
recommended.

service and customer care

l
If the cord is damaged it must, for safety reasons, be replaced
by Kenwood or an authorised Kenwood repairer.
UK
If you need help with:
l
using your machine
l
servicing or repairs (in or out of guarantee)
call Kenwood customer care on 023 92392333. Have your
model number ready (e.g. FP582) and date code
(5 digit code e.g. 13L35) ready. They are on the underside
of the processor.
l
spares and attachments
call 0844 557 3653.
other countries
Contact the shop where you brought the food processor.
l
Designed and engineered by Kenwood in the UK.
l
Made in China.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL
OF THE PRODUCT IN ACCORDANCE WITH EC
DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as
urban waste.
It must be taken to a special local authority differentiated waste
collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving
from inappropriate disposal and enables the constituent materials
to be recovered to obtain significant savings in energy and
resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out
wheeled dustbin.
guarantee UK only
If your food processor goes wrong within one year from the date
you bought it, we will repair it (or replace it if necessary) free of
charge provided:
l
you have not misused, neglected, or damaged it;
l
it has not been modified (unless by Kenwood);
l
it is not second hand;
l
it has not been used commercially;
l
you have not fitted a plug incorrectly; and
l
you supply your receipt to show when you bought it.
This guarantee does not affect your statutory rights.
7