Kenwood FP582 Instructions Manual page 3

safety
l
Read these instructions carefully and retain for future reference.
l
Remove all packaging and any labels.
l
The blades and discs are very sharp, handle with care. Always
hold the knife blade by the finger grip
away from the cutting edge, both when handling and
cleaning.
l
Always remove the knife blade before pouring contents from the bowl.
l
Keep hands and utensils out of the processor bowl and liquidiser jug whilst
connected to the power supply.
l
Switch off and unplug:
l
before fitting or removing parts;
l
after use;
l
before cleaning.
l
Never use your fingers to push food down the feed tube. Always use the
pusher/s supplied.
l
Never fit the blade unit to the power unit without the blender or
mill jar fitted.
l
Before removing the lid from the bowl or liquidiser/mill from the power unit:-
l
switch off;
l
wait until the attachment/blades have completely stopped;
l
Be careful not to unscrew the liquidiser jug or mill from the blade unit.
l
SCALD RISK: Hot ingredients should be allowed to cool to room temperature
before blending.
l
Do not use the lid to operate the processor, always use the on/off speed control.
l
This machine will be damaged and may cause injury if the
interlock mechanism is subjected to excessive force.
l
Never use an unauthorised attachment.
l
Never leave the machine on unattended.
l
Never use a damaged machine. Get it checked or repaired: see 'service and
customer care'.
l
Never let the power unit, cord or plug get wet.
l
Don't let excess cord hang over the edge of a table or worktop or touch hot
surfaces.
l
Do not exceed the maximum capacities stated.
l
Children should be supervised to ensure that they do not play with the
appliance.
l
This appliance shall not be used by children. Keep the appliance and its cord
out of reach of children.
at the top,
2