Citrus Juicer; Care And Cleaning - Kenwood KHH30 multizone Instruction Manual

4 Put the food in the feed tube.
5 Switch on, then push down evenly with the pusher
– never put your fingers in the feed tube.
hints
l
Use fresh ingredients.
l
Do not cut food too small. Fill the width of the feed
tube fairly full. This prevents the food from slipping
sideways during processing.
l
Food placed upright comes out shorter than food
placed horizontally.
l
There will always be a small amount of waste on
the disc or in the bowl after processing.
br

citrus juicer

Use the citrus juicer to squeeze the juice from
citrus fruits (e.g. oranges, lemons, limes and
grapefruits).
A
cone
B
sieve
to use the citrus juicer
1 Fit the bowl onto the power unit, add the
detachable drive shaft.
2 Fit the sieve into the bowl – ensuring the sieve
handle is locked into position directly over the bowl
bn
handle .
3 Place the cone over the drive shaft turning until it
drops all the way down
4 Cut the fruit in half. Then switch on and press the
fruit onto the cone.
l
The citrus juicer will not operate if the
sieve is not locked correctly.
l
For best results store and juice the fruit at room
temperature and hand roll on a worktop before
juicing.
l
To help with juice extraction move the fruit from
side to side when juicing.
l
When juicing large quantities, empty the strainer
regularly to prevent the build up of pulp and seeds.
bo
.

care and cleaning

l
Always switch off and unplug before cleaning.
l
Dismantle attachments fully before cleaning.
power unit
l
Wipe with a damp cloth, then dry.
l
Never use abrasives or immerse in water.
l
Store excess cord in the storage compartment
at the back of the machine.
l
Ensure the feet on the base of the mixer are kept
clean.
bowl, tools, splashguard
l
Wash by hand, then dry thoroughly.
l
Never use a wire brush, steel wool or bleach to
clean your stainless steel bowl. Use vinegar to
remove limescale.
l
Keep away from heat (cooker tops, ovens,
microwaves).
creaming beater
1 Always remove the flexible wiper blade from the
tool before cleaning
2 Wash the flexible wiper blade and tool in hot soapy
water, then dry thoroughly. Alternatively the parts
can be washed in a dishwasher.
Note: Please inspect the condition of the tool body
before and after use and also regularly inspect the
condition of the wiper blade and replace it if there
are any signs of wear.
food processor
l
Handle the blades and discs with care –
they are extremely sharp.
l
Some foods may discolour the plastic. This is
perfectly normal and won't harm the plastic or
affect the flavour of your food. Rub with a cloth
dipped in vegetable oil to remove the
discolouration.
citrus juicer
l
Wash by hand, then dry thoroughly.
7
bp
.
4