Electrical Safety And Emission Compliance Statement - Allied Telesis AT-GS903SX Installation Manual

Electrical Safety and Emission Compliance
Statement
Standards: This product meets the following standards.
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with this instruction manual,
may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
Note: Modifications or changes not expressly approved by the manufacturer
or the FCC can void your right to operate this equipment.
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
RFI Emission
WARNING: In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate
measures. ! 2
Immunity
Electrical Safety
U.S. Federal Communications Commission
Canadian Department of Communications
EN55022 Class A ! 1
EN50082-1 ! 3
EN60950, UL 1950, CSA 950 ! 4
iii