Initial Preparations; Charging The Battery Pack; Attaching The Strap; Holding The Camera - Canon PowerShot ELPH 140 IS User Manual

Initial Preparations

Prepare for shooting as follows.

Attaching the Strap

z

Holding the Camera

z
z
Downloaded From camera-usermanual.com Canon Manuals
z
Thread the end of the strap through the
strap hole ( ), and then pull the other
end of the strap through the loop on the
threaded end ( ).
z
Place the strap around your wrist.
z
When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. Do not rest
your fingers on the flash.

Charging the Battery Pack

Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.
1
Insert the battery pack.
z z
After aligning the  marks on the battery
pack and charger, insert the battery pack
by pushing it in ( ) and down ( ).
2
Charge the battery pack.
z z
CB-2LF: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
z z
CB-2LFE: Plug the power cord into the
CB-2LF charger, then plug the other end into a
power outlet.
z z
The charging lamp turns orange, and
charging begins.
z z When charging is finished, the lamp turns
green.
CB-2LFE
3
Remove the battery pack.
z z
After unplugging the battery charger,
remove the battery pack by pushing it in
( ) and up ( ).
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
11