On-Screen Messages; Memory Card - Canon PowerShot ELPH 140 IS User Manual

Playback stops, or audio skips.
•
Switch to a memory card that you have performed low-level formatting on with the
camera (= 77).
•
There may be brief interruptions when playing movies copied to memory cards that
have slow read speeds.
•
When movies are played on a computer, frames may be dropped and audio may skip
if computer performance is inadequate.
Sound is not played during movies.
•
Adjust the volume (= 62) if you have activated [Mute]
the movie is faint.

Memory Card

The memory card is not recognized.
•
Restart the camera, with the memory card in it
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
•
Press the <1> button to enter Playback mode. Hold the <n> button down as
you press the <o> and < m > buttons at the same time. On the next screen, press
the <q><r> buttons to choose [B], and then press the <m> button.
Eye-Fi Cards
Cannot transfer images (=
96).
Downloaded From camera-usermanual.com Canon Manuals
(= 74) or the sound in
(= 20).

On-Screen Messages

If an error message is displayed, respond as follows.
No memory card
•
The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (= 13).
Memory card locked
•
The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position
Cannot record!
•
Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (=
Memory card error (=
77)
•
If the same error message is displayed even after you have formatted a supported
memory card (= 2) and have inserted it facing the correct way
a Canon Customer Support Help Desk.
Insufficient space on card
•
There is not enough free space on the memory card to shoot (
= 70
or edit images ( – 72). Either erase unneeded images (
=
memory card with enough free space (
Charge the battery (=
11)
No Image.
•
The memory card does not contain any images that can be displayed.
Protected! (=
66)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back MOV/Cannot play back MP4
•
Unsupported or corrupt images cannot be displayed.
•
It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
(= 13).
13).
(= 13), contact
=
25, 39, 47)
=
68) or insert a
12).
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
101