Checking Connection Information; Disabling Eye-Fi Transfer - Canon PowerShot ELPH 140 IS User Manual

Connection status of Eye-Fi cards in the camera can be checked on the
shooting screen (in regular information display mode) or playback screen (in
simple information display mode).
(Gray) Not connected
(Blinking white) Connecting
(White) Connected
(Animated) Transfer in progress*
*1 Power saving (= 20) on the camera is temporarily disabled during image transfer.
*2 Restart the camera. Repeated display of this icon may indicate a problem with the
card.
Images labeled with a [ ] icon have been transferred.

Checking Connection Information

Check the access point SSID used by the Eye-Fi card or the connection
status, as needed.
z
z
z
Downloaded From camera-usermanual.com Canon Manuals
Interrupted
Not communicating
Error acquiring Eye-Fi card information*
1
z
Press the <n> button, choose
[Eye-Fi Settings] on the [3] tab, and then
press the <m> button.
z
Choose [Connection info], and then press
the <m> button.
z
The connection information screen is
displayed.

Disabling Eye-Fi Transfer

Configure the setting as follows to disable Eye-Fi transfer by the card, if
necessary.
2
•
[Eye-Fi Settings] is not shown unless an Eye-Fi card is in the
camera with its write-protect tab in the unlocked position. For this
reason, you cannot change settings for an inserted Eye-Fi card if
the write-protect tab is in the locked position.
z z
Press the <n> button, choose
[Eye-Fi Settings] on the [3] tab, and then
press the <m> button.
z z
Choose [Eye-Fi trans.], and then choose
[Disable].
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
97